Blog Feature

injection foam insulation | RetroFoam insulation | FAQs | energy efficiency

By: Amanda Emery
May 26th, 2021

While researching home insulation, you’re probably reading a lot about R-Value, and you’d like to know what RetroFoam’s is.

Blog Feature

injection foam insulation | RetroFoam insulation | FAQs

By: Amanda Emery
May 24th, 2021

Is Foam Insulation Safe to Have in Your Home? (Quick Answer) Yes, RetroFoam insulation is safe to install in the existing walls of your home. RetroFoam doesn’t off-gas, is Class One Fire Rated, and environmentally friendly.

Blog Feature

injection foam insulation | RetroFoam insulation | FAQs

By: Amanda Emery
April 23rd, 2021

Should I Insulate My Garage Common Wall? (Quick Answer) Yes, you should because this can be a source for air to move into and out of your home. Any airflow into the garage will come right through that common garage wall into your home. In the same sense, any air you’re paying to heat or cool can escape out into your garage.  

Blog Feature

injection foam insulation | RetroFoam insulation | sound dampening | sound deadening | FAQs

By: Amanda Emery
April 7th, 2021

Does RetroFoam Insulation Reduce Noise Transmission? (Quick Answer) RetroFoam insulation does have the added benefit of reducing noise in the home. While injection foam insulation won’t completely soundproof your home, it does have sound deadening qualities to make it quieter.

Blog Feature

injection foam insulation | RetroFoam insulation | home insulation problems | FAQs

By: Amanda Emery
April 6th, 2021

Can the Interior Drywall Pop, Crack, or Bow During RetroFoam Installation? (Quick Answer) While it is rare, this can happen. If this is one of your concerns, make sure to address it with your RetroFoam dealer to be on the same page about what will be done if any damage to the drywall were to happen.

Blog Feature

injection foam insulation | open cell spray foam insulation | RetroFoam insulation | closed cell spray foam insulation | existing wall insulation | FAQs

By: Amanda Emery
March 25th, 2021

What is RetroFoam? (Quick Answer) RetroFoam is a tripolymer based resin that creates an odor-free, non-toxic foam insulation. This injection foam doesn’t off-gas, is Class One Fire Rated, and safe to have in your home. It is an excellent fit for existing exterior walls and can be installed outside the home.

Blog Feature

home insulation | existing wall insulation | FAQs

By: Amanda Emery
March 25th, 2021

How to Tell if a Wall is Insulated (Quick Answer) You can check insulation in walls by removing an outlet cover or light switch to take a quick peek inside the wall to determine if there is any existing insulation in there. Another option is to drill a hole somewhere inconspicuous, like in the closet or under the baseboard, to take a look.

Blog Feature

injection foam insulation | open cell spray foam insulation | spray foam insulation | RetroFoam insulation | closed cell spray foam insulation | FAQs

By: Amanda Emery
March 25th, 2021

Can You Run Electrical Wire Through Insulation Like RetroFoam? (Quick Answer) Yes, you can. RetroFoam insulation is both soft and pliable. Its composition makes it very easy to fish electrical wiring through the injection foam insulation.

Blog Feature

injection foam insulation | RetroFoam insulation | FAQs | Installation

By: Amanda Emery
March 25th, 2021

How Do RetroFoam Installers Know When the Wall Cavity is Full? (Quick Answer) RetroFoam installers go through rigorous training to ensure the wall cavity is filled with injection foam insulation. This special training includes checking for obstructions in the wall, running the injection hose from the top down to the middle and from the bottom up, as well as listening to the sound of the hose as the foam is injected.